You choosing DumpLeader to help you pass Juniper certification JN0-130 exam is a wise choice. You can first online free download DumpLeader's trial version of exercises and answers about Juniper certification JN0-130 exam as a try, then you will be more confident to choose DumpLeader's product to prepare for Juniper certification JN0-130 exam. If you fail the exam, we will give you a full refund.
The life which own the courage to pursue is wonderful life. Someday when you're sitting in a rocking chair to recall your past, and then with smile in your face. Then your life is successful. Do you want to be successful in life? Then use DumpLeader's Juniper JN0-130 exam training materials quickly. This material including questions and answers and every IT certification candidates is very applicable. The success rate can reach up to 100%. Why not action? Quickly to buy it please.
DumpLeader promise that we will spare no effort to help you pass Juniper certification JN0-130 exam. Now you can free download part of practice questions and answers of Juniper certification JN0-130 exam on DumpLeader. When you select DumpLeader, you can not only pass Juniper certification JN0-130 exam, but also have one year free update service. DumpLeader can also promise if you fail to pass the exam, DumpLeader will 100% refund.
When you click into DumpLeader's site, you will see so many people daily enter the website. You can not help but be surprised. In fact, this is normal. DumpLeader is provide different training materials for alot of candidates. They are using our training materials tto pass the exam. This shows that our Juniper JN0-130 exam training materials can really play a role. If you want to buy, then do not miss DumpLeader website, you will be very satisfied.
Are you struggling to prepare Juniper certification JN0-130 exam? Do you want to achieve the goal of passing Juniper certification JN0-130 exam as soon as possible? You can choose the training materials provided by DumpLeader. If you choose DumpLeader, passing Juniper certification JN0-130 exam is no longer a dream.
Please select our DumpLeader to achieve good results in order to pass Juniper certification JN0-130 exam, and you will not regret doing so. It is worth spending a little money to get so much results. Our DumpLeader can not only give you a good exam preparation, allowing you to pass Juniper certification JN0-130 exam, but also provide you with one-year free update service.
Exam Code: JN0-130
Exam Name: Juniper (Juniper networks Certified internet specialist.e(jncis-e))
One year free update, No help, Full refund!
Total Q&A: 128 Questions and Answers
Last Update: 2013-11-18
In order to pass the Juniper JN0-130 exam, selecting the appropriate training tools is very necessary. And the study materials of Juniper JN0-130 exam is a very important part. DumpLeader can provide valid materials to pass the Juniper JN0-130 exam. The IT experts in DumpLeader are all have strength aned experience. Their research materials are very similar with the real exam questions . DumpLeader is a site that provide the exam materials to the people who want to take the exam. and we can help the candidates to pass the exam effectively.
JN0-130 Free Demo Download: http://www.dumpleader.com/JN0-130_exam.html
NO.1 Which three statements are true regarding the DHCP Internal Server? (Choose three.)
A. Can be in remote-access mode.
B. Can be in equal-access mode.
C. Can be in standalone mode.
D. Standalone mode is the default.
E. Equal-access mode is the default.
Answer: BCE
Juniper study guide JN0-130 exam simulations JN0-130 certification JN0-130 test
NO.2 Which CLI command displays the status of a PPP over Ethernet subinterface?
A. show pppoe interface
B. show ppp int state up
C. show ip interface brief
D. show pppoe subinterface
Answer: D
Juniper Bootcamp JN0-130 Bootcamp JN0-130 questions
NO.3 Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection
configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
Answer: CD
Juniper exam prep JN0-130 JN0-130
NO.4 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A
Juniper JN0-130 JN0-130 dumps JN0-130
NO.5 Which two types of routes may be advertised via EBGP? (Choose two.)
A. Routes that do not originate in the local AS and are learned by OSPF.
B. Routes that originate on the local router and are advertised into OSPF.
C. Routes that are transiting the local router and are BGP learned routes.
D. Routes that originate on the local router and are injected using a route map.
Answer: CD
Juniper exam simulations JN0-130 braindump JN0-130 JN0-130
NO.6 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE
Juniper JN0-130 test JN0-130 original questions JN0-130 exam prep
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D
Juniper certification training Braindumps JN0-130 JN0-130 practice questions
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C
Juniper JN0-130 JN0-130 braindump
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C
Juniper pdf JN0-130 JN0-130
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D
Juniper practice test JN0-130 certification JN0-130
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D
Juniper practice test JN0-130 pdf JN0-130 braindump JN0-130 JN0-130 certification training
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A
Juniper JN0-130 JN0-130 pdf
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B
Juniper JN0-130 certification training JN0-130 exam simulations
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B
Juniper questions JN0-130 JN0-130 test
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A
Juniper JN0-130 JN0-130 braindump JN0-130 exam
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC
Juniper JN0-130 demo JN0-130 exam JN0-130
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C
Juniper JN0-130 JN0-130 JN0-130 JN0-130 exam dumps
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C
Juniper JN0-130 JN0-130 practice test
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE
Juniper JN0-130 JN0-130 practice questions
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B
Juniper JN0-130 certification training JN0-130 exam simulations
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C
Juniper practice questions JN0-130 test answers JN0-130 exam prep JN0-130 exam simulations
NO.7 Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and
why?
A. It is Static. If the priorities are equal for a new neighbor and the current DIS only.
B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.
C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it
is elected as the DIS.
D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a
higher priority, it may become a backup DIS.
Answer: C
Braindumps Juniper JN0-130 Braindumps JN0-130
NO.8 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D
Juniper JN0-130 JN0-130 test JN0-130 JN0-130 exam prep
NO.9 Which CLI command disconnects all subscribers on an ATM PVC?
A. clear port 4/3.99
B. logout port 4/3.99
C. clear subscriber port 4/3.99
D. logout subscriber port 4/3.99
Answer: D
Juniper test JN0-130 demo JN0-130 certification JN0-130 exam prep JN0-130 braindump
NO.10 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A
Juniper JN0-130 test answers JN0-130 JN0-130 practice test
NO.11 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B
Juniper JN0-130 dumps JN0-130 JN0-130 original questions JN0-130 practice questions
NO.12 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C
Juniper certification training Braindumps JN0-130 JN0-130 test JN0-130 JN0-130
NO.13 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE
Juniper JN0-130 dumps JN0-130 JN0-130 study guide Braindumps JN0-130 JN0-130 certification training
NO.14 Which message type is used to initiate an RSVP-TE label switched path?
A. path
B. resv
C. setup
D. session
Answer: A
Juniper JN0-130 JN0-130 JN0-130 Bootcamp JN0-130 pdf
NO.15 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D
Juniper JN0-130 exam JN0-130 JN0-130 JN0-130
DumpLeader offer the latest 70-342 exam material and high-quality 3107 pdf questions & answers. Our 1z0-460 VCE testing engine and 70-321 study guide can help you pass the real exam. High-quality 70-467 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.dumpleader.com/JN0-130_exam.html
没有评论:
发表评论